GSM Alarm Systems

GSM 108 Zones Wireless & Wired Voice Home Alarm Security System LCD Auto Dialer

This system also can be alarm without phone card if somebody breaks into your home, but it should be inserted a phone card if you need this system give you a call or message when alarm is active.


  1. The  Latest System  & All Batteries are  Included
  2. Built-in  Backup Battery in Control Host
  3. Built-in  GSM Module No Need Extra Module
  4. Built-in  Small Siren in Control Host
  5. Antenna  Built-inside the Sensors
  6. Supports up to 99 Wireless and 8 Wired Defence Zones
  7. Learning  Code – Very Easy to Operate
  8. LCD  Display and Keypad (with backlight) on the Control Host
  9. Supports Partial Arm, Schedule Arm/Disarm, Entry Delay and Exit Delay
  10. Record  10 Seconds Alarm Voice Message
  11. Can  Check 40 Alarm History Records and Status History records
  12. FREE Upgrade  to Wireless Photoelectric Smoke Alarm

Extension function:This system can work with most of wireless alarm accessories in our store like smoke detector, gas detector, water leak detector, pet-immunity sensor, IR beams etc. Wireless Transmission Frequency for All Our  Wireless Alarm Systems is 433MHz

5 way to control alarm

1.keypad ( on the alarm control host)
2.SMS(text instructions to the alarm)
3.remote control( provided) call
5.Wireless keypad

Wide Applicability
1. Applies widely to works, banks, stores, warehouses, offices and homestead, thanks to its kinds of protection abilities like anti-theft, anti-robbery,
2. fire prevention, gas leakage protection and most importantly, emergency calls.

  1.  Completely Wireless (Simply plug in the keypad!) All sensors have a 200 foot range and 400 foot line-of-sight range
    4 .Advanced Sensor Technology.

Installing a alarm system in a home or business allows owners,any unwelcome people breaks into its defense area, the system will call you or call 911 by itself right now and its siren will cry loud to scare the intruder away. And your friends and neighbors nearby may come and see what’s going on here.

Easy To Install w/ Plug & Play Technology

NO need to plug into a phone line! Simply insert a 2G SIM card into the wireless GSM control host.

  1.  Plug the 2G SIM card into the panel and set up the phone Number to receive SMS/phone call.
  2. Arm / Disarm the system to make the system at work by using remote control/ keyboard /phone
  3.  When the PIR sensor or door sensor or other sensors be triggered, it will send signal to the panel system.
  4.  The siren will work and send SMS/ call to your preset Number after panel receive the sensor signal.


1.Keypad / Control Unit of alarm system

  •     Apply advanced mobile communication technology support SMS and dialing alarm
  •     8 wired defense zones and 100wireless defense zones.
  •     At most 5 wireless remote control codes
  •     LCD display. built-in clock, operate easily
  •     Sound prompt for all operations
  •     SMS prompt automatically about low power of battery
  •     SMS prompt when AC power lost or recover
  •     Can store 6 group of phone numbers; when alarming, system will make alarm call to these numbers automatically
  •     Can store 2 group of SMS number; when alarming, system will send alarming SMS automatically
  •     Can store 2 group of call number about alarm receiving center
  •     10-second automatic message recording
  •     Built-in artificial intelligent digital voice announcer
  •     Users can make call by using keypad o alarm panel, just like a telephone
  •     One-key-control function: out arm, home arm, remote arm
  •     SOS,fire,gas, door, hall,window,balcony,and perimeter places alarm
  •     Real-time,delay,24hours,bypass defense zones programming function
  •     Remote control arm, disarm, monitor and intercom by phone
  •     Wireless coding:easy to add additional wireless accessories
  •     comply with CCC safety standard and GB12663-2001 national standard
  •     Built-in AAA NI-HI rechargeable battery(can work about 48 hours): make alarm when power off


The wireless GSM control host nput Voltage: DC12V/1A
Standby Current: <55mA
Alarming Current: <450mA
Wireless Frequency: 433MHz, 2262/4.7MΩ
GSM Frequency: 850/900/1800/1900MHz
Back-up Battery: NI-HI AAA*6 DC7.2V
Siren Volume: 110dB
Wireless frequency is 433MHz,
Wireless PIR Detector(with Wall mounting and battery)      Latest design
High stability
Built-in antenna
Detection distance: 12 meters
Detection range: 110 degree
Operating power: 9V
Low battery indication
Anti-tamper switch for front cover
Wireless Door/ Window Magnet Sensor                    Suitable for Door, Window, drawer, cabinet…etc
Operating Power: 23A 12V
Built-in Antenna
It will send the alarm signal to control host once the door or window is opened
Low battery indication
Wireless distant Remote Control Power : 3V battery x 1 pcs(battery included)
Transmission Current: ≤ 7mA
Transmission Distance : 80m (No Obstacle)
Operational temperature:-10℃ to 55℃
Humidity: ≤ 80%
Small wired siren         Voltage:DC12V
Alarm Current:220mA
Current consumption (at 12Vdc with siren): 140mA
Oscillating frequency: 1.5-3.5kHz.


  • 1x  Keypad / Control Unit of alarm system
  • 8x  Door / Window Sensors of alarm system
  • 2x  Motion Detector of alarm system
  • 4x  Keychain Remotes of alarm system
  • 1x  wired Siren of alarm system
  • 1x   USA Power Adaptor

Leave a Reply

Your email address will not be published.